TECO JSDG2S-20A-EL - Page 361

6-50
On-line tuning parameter descriptions
tn837.0 On-line tuning flag
Initial Value Unit Setting Range Effective RS-485 Address
0 -- 0 ~ 1 Effective after Set
1325H
Setting description:
Setting Description
0 Disable the on-line tuning function
1
Enable stroke operation to enable on-line
tuning function
tn837.1 On-line tuning load convergence selection
Initial Value Unit Setting Range Effective RS-485 Address
1 -- 0 ~ 2 Effective after Set
1325H
Setting description:
Setting Description
0 Slow load convergence
1 Medium load convergence
2 Fast load convergence
tn837.2 On-line tuning system rigidity selection
Initial Value Unit Setting Range Effective RS-485 Address
4 -- 0 ~ 7 Effective after Set
1325H
Setting description:
Setting Description
0 Rigidity 0 (small rigidity)
1 Rigidity 1
2 Rigidity 2
3 Rigidity 3
4 Rigidity 4
5 Rigidity 5
6 Rigidity 6
7 Rigidity 7 (great rigidity)