7-48
Cn066 Notch filter frequency
【
6-4
】
Initial Value Unit Setting Range Effective Cn029 Reset
0 Hz 0 ~ 2000 -- --
RS-485 CANopen EtherCAT Pi Pe Pt S T
0045H 2042H 2042H O O O O -
Setting Description: When to eliminate the vibration or noise caused by resonance, etc., please input the frequency when
vibration occurs in Cn066.
Cn067 Notch filter quality factor (second set)
【
6-4
】
Initial Value Unit Setting Range Effective Cn029 Reset
7 -- 1 ~ 100 -- --
RS-485 CANopen EtherCAT Pi Pe Pt S T
0046H 2043H 2043H O O O O -
Setting Description: Used to adjust the frequency range to be suppressed, smaller the Cn067 value is, wider the frequency
range of suppression, and can be adjusted according to actual conditions.
Cn068 Notch filter depth (second set)
【
6-4
】
Initial Value Unit Setting Range Effective Cn029 Reset
0 -- 1 ~ 1000 -- --
RS-485 CANopen EtherCAT Pi Pe Pt S T
0047H 2044H 2044H O O O O -
Setting Description: Used to adjust the frequency depth to be suppressed, the smaller the Cn068 value is, the deeper the
frequency depth to be suppressed, and the User can adjust according to the actual conditions.
Cn069 Notch filter frequency (third set)
【
6-4
】
Initial Value Unit Setting Range Effective Cn029 Reset
0 Hz 0 ~ 2000 -- --
RS-485 CANopen EtherCAT Pi Pe Pt S T
0048H 2045H 2045H O O O O -
Setting Description: When vibration or noise is caused by eliminating resonance, please input the frequency when
vibration occurs in Cn069.
To Next Page
Loading...
