TECO L510 - Page 82

4-48
05-Preset Speed Parameters
05-00
Preset Speed Control mode Selection
Range
【0】: Common Accel / Decel.
【1】: Individual Accel/Decel for each preset speed 0-7.
05-01
Preset Speed 0 (Keypad Frequency)
05-02
Preset Speed 1
05-03
Preset Speed 2
05-04
Preset Speed 3
05-05
Preset Speed 4
05-06
Preset Speed 5
05-07
Preset Speed 6
05-08
Preset Speed 7
Range
【0.00 ~ 599.00】 Hz
05-17
Preset Speed 0 Acceleration time
05-18
Preset Speed 0 Deceleration time
05-19
Preset Speed 1 Acceleration time
05-20
Preset Speed 1 Deceleration time
05-21
Preset Speed 2 Acceleration time
05-22
Preset Speed 2 Deceleration time
05-23
Preset Speed 3 Acceleration time
05-24
Preset Speed 3 Deceleration time
05-25
Preset Speed 4 Acceleration time
05-26
Preset Speed 4 Deceleration time
05-27
Preset Speed 5 Acceleration time
05-28
Preset Speed 5 Deceleration time
05-29
Preset Speed 6 Acceleration time
05-30
Preset Speed 6 Deceleration time
05-31
Preset Speed 7Acceleration time
05-32
Preset Speed 7 Deceleration time
Range
【0.1 ~ 3600.0】s
 When 05-00 =【0】Accel /Decel 1 or 2 set by parameters 00-14/00-15 or 00-16/00-17 applies to all preset
speeds.
 When 05-00 =【1】Individual Accel/Decel applies to each preset speed 0-7, set by Parameter 05-17 to 05-32.
 Formula for calculating acceleration and deceleration time:
V/F mode:
Actual Acc time=
Time of Accel1 or 2 x Preset Frequency
V/F Max Frequency
Actual Dec time=
Time of Accel1 or 2 x Preset Frequency
V/F Max Frequency