27
SETTING A RADIO FREQUENCY FOR THE ALARM
1) Turn on the device, select the frequency you want to use as the alarm and adjust the volume to an
appropriate level.
2) Quick press the [ M ] button , the memory preset location will flash.
3) While still flashing, quick press the [ TIMER A ] or [ TIMER B ] button , the alarm “ ” icon will flash.
4) While still flashing, quick press the [ ] button , “ ” stops flashing and the setting is completed.
Tips:
Once the alarm time is reached, the radio turns on and stays on for as long as the alarm duration (01 – ●
60 minutes) was set. To turn off the device during the alarm playtime, quick press the red [ POWER ]
button twice.
If you wish to change the radio frequency during the alarm playtime, quick press the red [ POWER ] ●
button. This will deactivate the alarm after which you can adjust the frequency.
SETTING THE ALARM TIME
1) Press and hold the [ TIMER A ] button , the alarm time in the upper right corner of the display will start
to flash.
2) While still flashing, use the numeric keys to enter the time (4 digits in total). For example, 8:39 is entered
as [ 0 ], [ 8 ], [ 3 ], [ 9 ].
3) Now rotate the main tuning knob to set the duration after which the device should turn off (01 - 60 minutes).
4) Quick press [ TIMER A ] to confirm the setting, or wait for 2 seconds until it auto confirms. The alarm “ ”
icon for Timer A is shown on the display.
For setting [ TIMER B ] you can follow the same steps.
ALARM AUTO CLEARANCE
If the device is not used (turning knobs, pressing buttons) for three days, the alarm settings are automatically
cleared. To keep the alarm settings, you can turn off the automatic clearance feature.
1) Turn off the device.
2) Press and hold the [ VF/VM ] (SCAN) button for about 10 seconds, until “ ” or “ ” appears on
the display.
“ ” : The alarm auto clearance feature is turned on. Alarm settings are cleared after 3 days of not using
the device.
“ ” : The alarm auto clearance feature is turned off. Alarm settings are retained after 3 days of not
using the device.
To Next Page
Loading...
