TeeJet Technologies MATRIX 430 - Machine and GNSS Configuration

MATRIX
®
430
GUIDANCEJOB DATA CONFIGURATION INTRODUCTIONCONSOLE
v
98-05332-EN R4
Zoom In/Out .................................................................................................................................................................................................. 14
Pan .................................................................................................................................................................................................................... 15
APPLICATION MAPPING & APPLIED ALERT 16
Mapping with Console Only .....................................................................................................................................16
Mapping with Work On/Off Switch ...........................................................................................................................16
Applied Alert ............................................................................................................................................................16
CHAPTER 3 – CONFIGURATION 17
Machine Conguration .............................................................................................................................................................................. 17
Lightbar Spacing .......................................................................................................................................................................................... 18
GNSS Receiver Conguration .................................................................................................................................................................. 18
Not Acceptable GNSS Notification ...........................................................................................................................19
CHAPTER 4 – JOB DATA 20
Job Data Overview ..................................................................................................................................................20
Delete Job Data ......................................................................................................................................................20
Reports ...................................................................................................................................................................21
Memory Notications ................................................................................................................................................................................ 21
CHAPTER 5 – CONSOLE 22
Copyrights
© 2023 TeeJet Technologies. All rights reserved. No part of this document or the computer programmes described in it may be
reproduced, copied, photocopied, translated, or reduced in any form or by any means, electronic or machine readable, recording or
otherwise, without prior written consent from TeeJet Technologies.
Trademarks
Unless otherwise noted, all other brand or product names are trademarks or registered trademarks of their respective companies or
organisations.
Limitation of Liability
TEEJET TECHNOLOGIES PROVIDES THIS MATERIAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR
IMPLIED. NO COPYRIGHT LIABILITY OR PATENT IS ASSUMED. IN NO EVENT SHALL TEEJET TECHNOLOGIES BE LIABLE FOR
ANY LOSS OF BUSINESS, LOSS OF PROFIT, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS, OR FOR INDIRECT,
SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES OF ANY KIND, EVEN IF TEEJET TECHNOLOGIES HAS BEEN ADVISED
OF SUCH DAMAGES ARISING FROM TEEJET TECHNOLOGIES SOFTWARE.