Matrix 908 Field Computer
17
98-01578-ENUS R3
CONSOLESTART JOB SETUPHELP MEASUREMENTSUT SETUP
NO.3 ENTER AVAILABLE UNLOCKS
Before using some features or options (listed below),
it is necessary to activate the function with an unlock
code. The unlock code is a unique code for each
feature and console.
The following features are locked and require an
unlock code to access:
X ISOBUS Universal Terminal – unlocks basic
ISOBUS capabilities and access to the
Universal Terminal (UT)
– Universal Terminal (UT) is available from
the Main Menu and Guidance Screen.
See "Access the Universal Terminal" on
page 44 for details.
X Prescription – unlocks prescription mapping
capabilities
– ISOBUS Universal Terminal is required to be
unlocked before a Prescription unlock code
can be entered
X Advanced Spreader – unlocks the ability
to program more than two sections when
establishing a Spreader device
Unlock Codes can be obtained two ways:
W System Order included unlocked features –
refer to the PDF instruction sheet included with
your order
W Unlock purchased post-receipt of your system –
PDF instruction sheet with console specic
code will be provided. Contact TeeJet Costumer
Service or your local dealer for details.
A console reboot is required after entering an unlock
code.
To Next Page
Loading...
