Operators
Safety
Summary
Power Source
This product
is
intended
to
operate from a power source that does not apply more
than
250 volts rms between the supply conductors or between either supply
conductor and ground. A protective ground connection by way
of
the grounding
conductor
in
the power cord
is
essential for safe operation.
Grounding the Product
This product
is
grounded through the grounding conductor of the power cord. To
avoid
electrical shock, plug the power cord into a properly wired receptacle before
connecting to the product input or output
terminals. A protective ground
connection
by
way of the grounding conductor
in
the power cord
is
essential for
safe operation.
Danger Arising From Loss
of
Ground
Upon loss of the protective-ground connection,
all
accessible conductive parts
(including knobs and
controls that may appear
to
be
insulating) can render
an
electric shock.
Use the Proper Power Cord
Use only the power cord and connector specified for your product.
Use
only a power cord that
is
in
good condition.
For detailed information on power cords and connectors see
Table 1-1.
Use the Proper Fuse
To avoid fire hazard, use only a fuse of the correct type, voltage rating and current
rating as specified
in
the parts list for your product.
Do Not Operate
in
Explosive Atmospheres
To avoid explosion, do not operate this product
in
an
explosive atmosphere unless
it has been specifically certified for such operation.
Do Not Remove Covers or Panels
To avoid personal injury, do not remove the product covers or panels. Do not
operate the product without the covers and
panels properly installed.
2465A/2455A/2445A Operators
vii
To Next Page
Loading...
Need help?
General
