General Information
Repackaging For Shipment
If this instrument
is
to
be
shipped
by
commercial transportation, it should
be
packaged
in
the original manner. The carton and packaging material
in
which your
instrument was shipped to you
should
be
retained for this purpose.
If the original packaging
is
unfit for use or is not available, repackage the
instrument
as
follows:
1.
Obtain a corrugated cardboard shipping carton having inside dimensions at
least six inches greater than the instrument dimensions
and
having a carton
test strength of at
least 275 pounds.
2.
If the instrument
is
to
be
shipped to a Tektronix Service Center for service or
repair, attach a tag to the instrument showing the following: owner of the
instrument (with address), the name of a person at your firm who can
be
contacted, complete instrument type and serial number, and a description of
the service required.
3.
Wrap the instrument with polyethylene sheeting or equivalent to protect the
outside finish
and
prevent entry of packing materials into the instrument.
4.
Cushion the instrument
on
all
sides by tightly packing dunnage or urethane
foam between the carton and the instrument,
allowing three inches
on
each
side.
5.
Seal
the carton with shipping tape or with
an
industrial stapler.
6.
Mark the address of the Tektronix Service Center
and
your return address
on
the carton
in
one or more prominent locations.
2465A/2455A/2445A Operators
1-5
To Next Page
Loading...
Need help?
General
