Characteristics
Shock (operating and
nonoperating)
Not Rack Mounted
Rack Mounted
Transit Drop (not
in
shipping package)
Bench
Handling (cabinet on
and cabinet off)
Topple (operating with
cabinet
installed)
Packaged Transportation
Drop
Packaged Transportation
(Vibration)
EMI (Electro-magnetic
Interference)
Electrostatic
Discharge
Susceptibility
X-Ray Radiation
Performance Characteristics
Table 6-8 (cont)
Environmental Requirements
Performance Requirements
50
g,
half sine,
11
ms duration, three shocks on each
face, for a
total of 18 shocks.
30
g.
8-inch drop on each corner and each face
(MIL-T-28800C, para. 4.5.5.4.3).
MIL-STD-810C, Method 516.2, Procedure V
(MIL-T-28800C, para. 4.5.5.4.3).
Set on rear feet and allow to topple over onto each
of
four adjacent faces (Tektronix Standard 062-2858-00).
Meets the limits
of
the National Safe Transit Assn., test
procedure 1A-B-2;
10 drops
of
36 inches (Tektronix
Standard
062-2858-00).
Meets the limits
of
the National Safe Transit Assn., test
procedure 1 A-B-1; excursion
of
1 inch
pop
at 4.63 Hz
(1.1
g)
for 30 minutes (Tektronix Standard 062-2858-00).
Meets MIL-T-28800C; MIL-STD-461B, part 4 (CE-03
and CS-02), part 5 (CS-06 and RS-02), and part 7
(CS-01, RE-02, and
RS-03)-limited
to
1 GHz; VDE
0871, Category B; Part 15 of
FCC
Rules and
Regulations, Subpart
J,
Class A; and Tektronix
Standard
062-2866-00.
Meets Tektronix Standard 062-2862-00. The instrument
will not change
control states with discharges of less
than 10 kV.
Meets requirements
of
Tektronix Standard 062-1860-00.
2465A/2455A/2445A Operators
6-37
To Next Page
Loading...
Need help?
General
