Analyzing Wavef
orms
4. Select the Type and standard.
5. Click Co nfig to access the M ask
Configuration control w indow, where you
can adjust h
ow masks and violations are
displayed and how Mask Autoset and
Autofitareconfigured.
6. Click Masks to return to the Mask Setup
control wi
ndow.
7. Click Lock Mask to Wfm On to track
mask changes in the horizontal or
vertical settings.
8. Toggle Hit Count On to highlight
violations during a mask test.
9. Click Autoset to automatically align the
waveform with the mask based on the
characteristics of the input signal.
10. Toggle Auto fit On to automatically
reposition the waveform after each
acquisition to minimize hits.
DPO7000 S eries Quick Start User Manual 65
To Next Page
Loading...
