Tektronix PS 5010

VPOSITIVE
Type:
Setting or query
Setting syntax:
VPOS <number>
VPOSITIVE <number>
Query syntax:
VPOS?
VPOSITIVE?
Query response example:
VPOS 1 .o;
VPQS 29.7;
Discussion:
This command sets the positive floating supply voltage
limit to the value specified. The units are volts for both the
setting and query versions. The range is 0
V to $32 V and
the resolution is 0.01 V to 10 V and 0.1 0 V above 10.0 V.
VPOSITIVE
VTRACK
Type:
Setting
Setting syntax:
VTRA <number>
VTRACK <number>
Examples:
VTRA 25.3
VTRA 5.02
VTRACK
2
Discussion:
This command sets the voltage magnitude of both float-
ing supplies to the absolute value specified. Units are volts.
The range is
0 V to 32 V and the resolution is 0.01 V to 10 V
and 0.1 0 V above 10.0 V.
VTWACK
REV OCT 1986