Tektronix PS 5010 User Manual

Table 3-1
ERROR QUERY AND STATUS INFORMATION
Abnormal Conditions
Event
Command Errors
Command header error
Header delimiter error
Command argument error
Argument delimiter error
Missing argument
Invalid message unit delimiter
Binary block checksum error
binary block byte counter error
Execution Errors
Command not executable in local mode
Returned to local, new settings pending lost
I10 buffers full, output dumped
Settings conflicts
Argument out of range
Group execute trigger ignored
Bus response
to ERR?
- --
Response to
serial polla
Normal Conditions
Internal Errors
System error
Math pack error
System Events
Power on
User request
-
Device Dependent Events
Negative supply goes to constant voltage mode
Negative supply goes to constant current mode
Negative
supply goes to unregulated mode
Positive supply goes to constant voltage mode
Positive supply goes to constant current mode
Positive supply goes to unregulated mode
Logic supply goes to constant voltage mode
Logic supply goes to constant current mode
Logic supply goes to unregulated mode
aIf the message processor is busy, the instrument returns the higher decimal number.
302
303
99 or 115
99or 115

Tektronix PS 5010 Specifications

General

Brand	Tektronix
Model	PS 5010
Category	Power Supply
Language	English