Field Description
For Wire Mode = 1, 1 # or 1
%- the second pair of wires is defined here.
For Wire Mode = 1 or 1 %- the second and third
pair of wires is defined here.
Wire pairs already used in defined connections are not available
for selection. If these continue to be used for this SHDSL con-
nection, the existing connection must first be terminated.
Minimum Number of
active Links
For Wire Mode = 1 %-, 1 %- or 1 %-
the minimum number of active links is defined.
Requested Rate Only for Clock Rate = 9<.
Select which speed should be used.
Line Speed Interval Only for Clock Rate = -).
Under Minimum select the minimum clock rate and under Max-
imum the maximum clock rate for the connection.
11 Physical Interfaces Teldat GmbH
144 bintec Rxxx2/RTxxx2
To Next Page
Loading...
Need help?
General
