Field Description
Name Displays the name of the AP. You can change the name.
Description Enter a unique description for the AP.
CAPWAP Encryption Select whether communication between the master and slaves
is to be encrypted.
The function is activated by selecting ,.
The function is enabled by default.
You can override the encryption in order to view the communic-
ation for debugging purposes.
Fields in the Wireless module1 or in the Wireless module 2 menu.
Field Description
Operation Mode Displays the mode in which the wireless module is to be oper-
ated. You can change the mode.
Possible values:
• : (default value): The wireless module is used as an access
point in your network.
• :!!: The wireless module is not active.
Active Radio Profile Displays the wireless module profile that is currently selected.
You can select another wireless module profile from the list if
more than one wireless module profile are being set up.
Channel Displays the channel that is assigned. You can select another
channel.
The number of channels you can select depends on the country
setting. Please consult the data sheet for your device.
Access Point mode
Configuring the network name (SSID) in Access Point mode
means that wireless networks can be logically separated from
each other, but they can still physically interfere with each other
if they are operating on the same or closely adjacent wireless
channels. So if you are operating two or more radio networks
close to each other, it is advisable to allocate the networks to
Teldat GmbH
13 Wireless LAN Controller
bintec Rxxx2/RTxxx2 165
To Next Page
Loading...
Need help?
General
