Fields in the menu Performance Settings
Field Description
Wireless Mode
Select the wireless technology that the access point is to use.
For Operation Band = ?G 5:3
Possible values:
• : The device operates only in accordance with
802.11g. 802.11b clients have no access.
• : Your device operates only in accordance with
802.11b and forces all clients to adapt to it.
• < 5 : Your device adapts to the client
technology and operates according to either 802.11b or
802.11g.
• < , 5 : Your device adapts to the cli-
ent technology and operates according to either 802.11b or
802.11g. Only a data rate of 1 and 2 mbps needs to be sup-
ported by all clients (basic rates). This mode is also needed
for Centrino clients if connection problems occur.
• < # 5 : Your device adapts to the
client technology and operates according to either 802.11b or
802.11g. The following applies for mixed-short: The data rates
5.5 and 11 mbps must be supported by all clients (basic
rates).
• 5 5: Your device operates according to either
802.11b, 802.11g or 802.11n.
• 5: Your device operates according to either
802.11g or 802.11n.
• : Your device operates only according to 802.11n.
For Operation Band = ?G , ?G :3,
?G 5:3 or ?G :3
Possible values:
• : The device operates only in accordance with
802.11a.
• : Your device operates only according to 802.11n.
• 5: Your device operates according to either
802.11a or 802.11n.
13 Wireless LAN Controller Teldat GmbH
170 bintec Rxxx2/RTxxx2