Field Description
When using the internal DSL modem, select here the EthoA in-
terface configured in Physical
Interfaces->ATM->Profiles->New, e.g. .
User Name Enter the user name.
Password Enter the password.
Always on Select whether the interface should always be activated.
The function is enabled with ,.
The function is disabled by default.
Only activate this option if you have Internet access with a flat-
rate charge.
Connection Idle
Timeout
Only if Always on is disabled.
Enter the idle interval in seconds. This determines how many
seconds should pass between sending the last traffic data pack-
et and clearing the connection.
Possible values are to $ (seconds). deactivates the
timeout.
The default value is $.
Example: for FTP transmission, for LAN-to-LAN transmis-
sion, for Internet connections.
Fields in the IP Mode and Routes menu.
Field Description
IP Address Mode Select whether your device is to be assigned a static IP address
or whether it should be assigned this dynamically.
Possible values:
• -## (default value): Your device is automatic-
ally assigned a temporarily valid IP address from the provider.
• *" : You enter a static IP address.
Default Route Select whether the route to this connection partner is to be
Teldat GmbH
17 WAN
bintec Rxxx2/RTxxx2 279
To Next Page
Loading...
Need help?
General
