Field Description
Description Enter a unique name for the tunnel.
The first character in this field must not be a number No special
characters or umlauts must be used.
PPTP Mode Enter the role to be assigned to the PPTP interface.
Possible values:
• '* (default value): this assigns the PPTP interface the role
of PPTP server.
• 81# 2, %: This assigns the PPTP interface
the role of PPTP client.
User Name Enter the user name.
Password Enter the password.
Always on
Select whether the interface should always be activated.
The function is enabled with ,.
The function is disabled by default.
Connection Idle
Timeout
Only if Always on is disabled.
Enter the idle interval in seconds. This determines how many
seconds should pass between sending the last traffic data pack-
et and clearing the connection.
Possible values are to $ (seconds). deactivates the
timeout.
The default value is $.
Example: for FTP transmission, for LAN-to-LAN transmis-
sion, for Internet connections.
Remote PPTP IP Ad-
dress
Only for PPTP Mode = '*
Enter the IP address of the PPTP partner.
Remote PPTP IP Ad-
dressHost Name
Only for PPTP Mode = 81# 2, %
Enter the IP address of the PPTP partner.
Teldat GmbH
18 VPN
bintec Rxxx2/RTxxx2 373
To Next Page
Loading...
Need help?
General
