Field Description
Pool Usage Specify whether the IP pool is used for DHCP requests in the
same subnet or for DHCP requests that have been forwarded to
your device from another subnet. In this case it is possible to
define IP addresses from another network.
Possible values:
• /", (default value): The DHCP pool is only used for DHCP
requests in the same subnet.
• @,&: The DHCP pool is only used for DHCP requests for-
warded from other subnets.
• /",5@,&: The DHCP pool is used for DHCP requests in
the same subnet and from other subnets.
The menu Advanced Settings consists of the following fields:
Fields in the menu Advanced Settings
Field Description
Gateway Select which IP address is to be transferred to the DHCP client
as gateway.
Possible values:
• 0# 3 # 1& (default value): Here, the IP ad-
dress defined for the Interface is transferred.
• ' 1&: No IP address is sent.
• *)"!&: Enter the corresponding IP address.
Lease Time Enter the length of time (in minutes) for which an address from
the pool is to be assigned to a host.
After the Lease Time expires, the address can be reassigned
by the server.
The default value is .
DHCP Options Specify which additional data is forwarded to the DHCP client.
Possible values for Option:
• ( * (default value): Enter the IP address of the
time server to be sent to the client.
21 Local Services Teldat GmbH
448 bintec Rxxx2/RTxxx2
To Next Page
Loading...
Need help?
General
