Field Description
"7 3) )3#  "! 3 the current
configuration was saved as boot configuration and the previ-
ous boot configuration was also archived.
You can load back the archived boot configuration.
• ., #!15!1: The file in the Select file
field is deleted.
• ) , 3 : You can import additional language ver-
sions of the GUI into your device. You can download the files
to your PC from the download area at www.teldat.de and
from there import them to your device
• 0) #&# #!1: You can launch an update of
the system software, the ADSL logic and the BOOTmonitor.
• ) 6" %, 8 9,#: (Only displayed if an
SD card is inserted.) In file name, select the
#H1!,#G) file that you wish to import.
• <) "! 3 1 # !:
The active configuration from the RAM is transferred to your
local host. If you click the Go button, a dialog box is dis-
played, in which you can select the storage location on your
PC and enter the desired file name.
Action
Select the action you wish to execute.
After each task, a window is displayed showing the other steps
that are required.
Possible values:
• ' -" (default value):
• ) "! 3: Under Filename select a config-
uration file you want to import. Please note: Click Go to first
load the file under the name  in the flash memory for the
device. You must restart the device to enable it.
Please note: The files to be imported must be in CSV format!
• ) , 3 : You can import additional language ver-
sions of the GUI into your device. You can download the files
to your PC from the download area at www.teldat.de and
from there import them to your device.
• 0) #&# #!1: You can launch an update of
the system software, the ADSL logic and the BOOTmonitor.
Teldat GmbH
22 Maintenance
bintec Rxxx2/RTxxx2 511
To Next Page
Loading...
Need help?
General
