TELEDYNE OLDHAM SIMTRONICS iTRANS 2 - Page 39

iTRANS 2
FIXED POINT SINGLE OR DUAL GAS MONITOR
WITH DUAL ANALOG OUTPUTS
USER MANUAL
77036429-EN
Revision 7.0
33
5.6.15 Last alarm – Day
The day of last alarm is designated with an “2” in the status
bit. The day of last alarm is displayed on the top line of the
LED display. This information can’t be editable.
Figure 5-289 Day of last alarm
Display
5.6.16 Last alarm- Mouth
The mouth of last alarm is designated with an “3” in the status
bit. The day of last alarm is displayed on the top line of the
LED display. This information can’t be editable.
Figure 5-30 Mouth of last alarm
5.6.17 Last calibration – Day
The day of last calibration is designated with an “6” in the
status bit. The day of last calibration is displayed on the top
line of the LED display. This information can’t be editable.
Figure 5-31 Day of last calibration
Display