Teledyne Q-Flex - Edit->Unit->Carrier ID Screen

Q-Flex Satellite Modem Installation and Operating Handbook
6-45
Figure 6-20 Edit->Unit->Miscellaneous->Reset Screen
6.2.1 Edit->Unit->Carrier ID Screen
The Edit->Unit->Carrier ID screen is shown in Figure 6-21. This allows a low-power
spread spectrum signal containing user identification information to be superimposed on
the Tx carrier. When used with a suitable decoder, the information can be used to identify
the source of satellite carriers that are interfering with other satellite services.
Figure 6-21 Edit->Unit->Carrier ID Screen