To Next PageTo Next Page
Need help?Do you have a question about the Telesis PINSTAMP TMP4100 Series and is the answer not in the manual?
General| Brand | Telesis |
|---|---|
| Model | PINSTAMP TMP4100 Series |
| Category | Industrial Equipment |
| Language | English |
Provides an introduction to the TMP4100, TMP4100E, TMP4150, and TMP4155 marking heads.
Details the technical specifications for TMP4100, TMP4100E, TMP4150, and TMP4155 marking heads.
Offers guidelines for receiving and unpacking the TMP4100-Series marking equipment.
Outlines the necessary requirements for the proper installation of the marking head.
Describes the step-by-step procedures for installing the TMP4100-Series marking equipment.
Introduces troubleshooting, testing, repair, and replacement procedures for the marking head.
Lists essential safety precautions to be observed when performing maintenance on the marker.
Details periodic adjustments needed to maintain peak system performance.
Provides information for cleaning the various marking head components.
Offers information to identify problems, probable causes, and corrective actions for the marking head.
Provides reference tables to check the circuitry of the marking heads.
Covers authorized repair procedures, limited to impact pin reconditioning.
Lists authorized replacement procedures for marking head components.
Provides information to assist in obtaining components for maintaining the marking head.
Defines the product and its chemical family for carbide pins.
Lists hazardous ingredients, CAS numbers, and exposure limits for carbide pins.
Details routes of exposure, effects, and first aid for carbide pins.
Outlines respiratory, ventilation, and personal protective equipment recommendations.
