TMP4100-Series Installation/Maintenance
iv 33480D01.DOC
Change 1
Safety Summary
The TMP4100-Series markers use high voltage power supplies and high pressure pneumatic supplies.
Accordingly, there is some danger when working with, and near, Pinstamp
®
marking machines. The
following safety precautions should be observed at all times.
♦ Never use the marker in any manner or for any purpose other than that for which it was designed.
♦ Eye protection may be required when working in close proximity of an operating marker.
♦ Ear protection may be required when working with or near an operating marker.
♦ Keep all body parts, jewelry, and clothing clear of the marker while it is operating.
♦ Do not remove or defeat the marker’s safety features or protective guards.
♦ TMP4100, TMP4150, TMP4155: Do not disconnect the tubing while air pressure is applied to the lines.
Warnings, Cautions, and Notes are placed throughout this document to alert you to important information.
These messages have the following significance.
WARNING
Warnings contain information that is essential to the personal safety of the user.
CAUTION
Cautions contain information that is essential to avoid damage to the equipment.
NOTE
Notes call attention to information of special importance at specific points within the text.
To Next Page
Loading...
