TMP4100-Series Installation/Maintenance
33480D01.DOC A-9
6. REACTIVITY DATA
Stability: Unstable X Stable
Hazardous Polymerization: May Occur X
Will Not Occur
Incompatibility: Reacts with strong acids to generate hydrogen gas.
Materials to Avoid: Strong acids and oxidizers.
Hazardous Decomposition Products: Metallic oxides.
Conditions to Avoid: Avoid generation of airborne dust and fumes.
7. SPILL OR LEAK PROCEDURES
Steps To Be Taken In Case of Release or Spill: N/A
Special Precautions: Use good housekeeping practices to prevent accumulations of dust and to keep airborne dust
concentrations at a minimum.
Waste Disposal Method: Dust, etc. — Follow federal, state, and local regulations regarding disposal.
See Appendix A, Handling Procedures, for additional data (if any) for each element.
8. SPECIAL PROTECTION INFORMATION
Ventilation Requirements: Use general or local exhaust ventilation to keep airborne concentrations of dust and fumes
below the TLV. Consult a professional hygienist.
Respiratory Protection: If fumes, misting, or dust conditions occur, consult a professional hygienist. Provide NIOSH
approved respirators.
Gloves: Gloves and barrier creams may be necessary to prevent skin sensitization and dermatitis.
Personal Protective Equipment: Always consult a professional hygienist.
Eye Protection: Safety glasses should always be worn when grinding or cutting. Face shields should be worn when
welding or burning.
Other Clothing or Equipment: As required
To Next Page
Loading...
