Then scroll all the way down until you see the following icon which indicates the
network settings.
In this menu you define:
- Hostname
- Address mode (Static ā DHCP)
Static: in this mode the IP address and subnet mask is fixed and must be provided in the
appropriate fields.
DHCP: DHCP stands for Dynamic Host Configuration Protocol and is a protocol used by the WCAP
to obtain the parameters necessary for operation in an Internet Protocol network automatically.
This protocol reduces system administration workload, allowing the WCAP to be added to the
network with little or no manual configuration.
There must be a DHCP server on the network that dynamically assigns IP addresses when using
the DHCP setting.
- IP address
Here you can enter the desired fixed IP address. Only applicable in fixed IP address mode.
- Subnet mask
- Gateway setting
To Next Page
Loading...
