6.3 The current used frequency
The current used frequency is marked with the antenna icon
6.4 Frequencies used by other Confidea G3 systems
Frequencies used by other Confidea G3 systems which are connected to same LAN network (see chapter 7.1) are
mentioned in the below screen ; the identification of the other Confidea G3 sustem(s) is doen by their hostnames
6.5 Other indications
6.5.1 Signal quality
=> shows the quality of the signal , based on interference detected on that frequency
=> low signal quality due to interference or low level
=> high signal quality , least or no interference
=> do not use this frequency , because signal strength to low or signal to disturbed
6.5.2 Sorting frequencies
=> mark/unmark all frequencies toggle button
=> sort frequencies according to signalquality
To Next Page
Loading...
