Televic Confidea - Return to Factory Settings

12
- In the next item you have to fill in a hostname. This is a name which can be associated with the
device for easy recognition in the system. Also when you have multiple WCAPs running
simultaneously, you will be able to identify which frequencies are used by which hosts
- After you’ve completed the wizard you need to login. The default login and password are
Login: admin
Password: admin
4.5 Return to factory settings
If the ip address is not known then a return to factory settings (default ip address) is possible by
pressing the reset button next to the middle antenna , during 10 sec , and release the button .
Following screens will appear while pushing reset button and wait until the circle is completed