MA365 • Rev. A2 47
Tellabs
®
6325 Edge Node 3 Reference Information
Connectors on modules The functions of the connectors are described in the table below. See the mod-
ules in ‘3.1 Front Layout’ on page 39.
Connector Description on module
STM-16 STM-16 optical interface with SFP transceiver SIMX16
STM-1/4 STM-1 or STM-4 optical interface with SFP trans-
ceiver
SIMX4,
SIMX16,
SPIMX
E1 2 Mbit/s interface, 120 ohm SPIMX,
PIM1
UCH Interface for user channels and engineering or-
dering wire (DTMF-EOW).
SIMX4,
SIMX16,
SPIMX
MGT Ethernet interface CMCC
CT Craft terminal interface CMCC
SYNC /
ALARM
2 MHz synchronization input/output and alarm
interface
FAN
DC Power DC power 40.5 - 72 V; 0 - 2.2 A PS-DC
To Next Page
Loading...
