Tenda I-WL-O3 - Page 22

17
2 Quick Installation Guide
Before configuring Repeater + P2MP settings, verify the following information:
AP
Mode
SSID
MAC Address
Key
Base AP
P2MP
Tenda_002160
C8:3A:35:00:21:61
11111111
AP1
Repeater
Tenda_000050
C8:3A:35:00:00:51
11111111
AP2
Tenda_000020
C8:3A:35:00:00:21
11111111
AP3
Tenda_130507
C8:3A:35:13:05:08
11111111
AP4
Tenda_4EF409
C8:3A:35:4E:F4:10
11111111
Note:
1. As for IP addresses, they should not be the same but on the same network segment.
2. The base AP’s and the remote device’s SSIDs, channels, security modes and keys should be
kept the same.
3. Up to 4 APs can be bridged at the same time both for both the Repeater and P2MP mode.