32
4. Enter the WiFi password you set on CPE1 in the Key text box, and click Next.
5. Set the IP address to an unused IP address belonging to the same network segment as that
of CPE1. For example, if the IP address of CPE1 is 192.168.2.1, you can set the IP address of
the device to 192.168.2.X (X ranges from 2 to 254). Then click Next.
6. Click Save, and wait until the device reboots to activate the settings.
----End
When LED1, LED2, and LED3 of CPE1 are solid on, and LED1, LED2, and LED3 of CPE2 are
blinking, the bridging succeeds.
You can check the SSID and key of CPE2 by choosing Wireless > Basic after logging in to the web UI.
To Next Page
Loading...
Need help?
General
