Tenda I-WL-O3 User Manual

54
3. Click Next directly on the following page.
4. Set the IP address to an unused IP address belonging to the same network segment as that
of CPE1. For example, if the IP address of the CPE1 is 192.168.2.1, you can set this device’s
IP address to 192.168.2.X (X ranges from 2 to 254). Then click Next.

Tenda I-WL-O3 Specifications

General

Brand	Tenda
Model	I-WL-O3
Category	Network Router
Language	English