Tennant T5 - Page 29

MAINTENANCE
Tennant T5 (06- 16)
29
8. Replace brushes when they no longer clean
effectively or when the bristles are worn to the
yellow indicator (Figure 69).
FIG. 69
9. Empty and rinse out the debris trough (Figure 70).
Cylindrical Brush Model
FIG. 70
10. Inspect the cylindrical brushes for wear. Rotate
brushes from front- to- rear every 50 hours (Figure
71). Replace when worn to a length of 15mm.
15mm
Cylindrical
Brush Model
FIG. 71
11. Remove debris buildup from the underside of the
cylindrical brush scrub head, including the idler
plates and drive hubs (Figure 72).
Cylindrical Brush Model
FIG. 72
12. Wipe the squeegee blades clean (Figure 73). Store
the squeegee assembly in the raised position to
prevent blade damage.
FIG. 73
13. Check the condition of the squeegee blade wiping
edge (Figure 74). Rotate blade if worn (See
SQUEEGEE BLADES).
FIG. 74