Tennant T5 - Comprehensive Maintenance Schedule

MAINTENANCE
Tennant T5 (12- 13)
27
MAINTENANCE CHART
3
2
1
4
5
7
8
9
10
11
13
12
14
O = Operator T = Trained Personnel
Interval/
Hour s
Person
Resp.
Key Description Procedure
Daily
O 1 Squeegee Check for damage and wear
O 2 Scrub brushes and pads Check for damage and wear
O 3 Recovery tank Clean tank. Clean debris tray.
O 4 Solution tank Clean
O Machine Check for leaks
O 5 Disk scrub head skirt Check for damage and wear
O 6 Cylindrical scrub head skirt Check adjustment. Check for damage
and wear.
O 7 FaST PAK supply hose and connector
(option)
Clean and connect hose to storing plug
when not in use
Weekly O 8 Battery cells Check electrolyte level
50 Hours O 9 Cylindrical brushes Check taper and rotate front to rear
100 Hours O 10 Cylindrical scrub brush drive belts Check tension
200 Hours O 8 Battery terminals and cables Check and clean
750 Hours T 11 Vacuum fan motor Replace carbon brushes
T 12 Disk brush motors Replace carbon brushes
T 13 Propelling motor Replace carbon brushes
1000 Hours T 14 Cylindrical brush motors Replace carbon brushes
T 7 FaST water and air filters Replace