Tennant T5 - Routine Machine Maintenance; Daily Maintenance Procedures

MAINTENANCE
28
Tennant T5 (12- 13)
MACHINE MAINTENANCE
To keep the machine in good working condition, it’s
important that the following maintenance procedures
are performed on a routine basis.
FOR SAFETY: Before leaving or servicing machine,
stop on level surface, turn off machine, remove key
and set parking brake if equipped.
FOR SAFETY: When servicing machine, wear
personal protection equipment as needed.
DAILY MAINTENANCE (After Every Use)
1. Drain the recovery tank (Figure 62).
FIG. 62
2. Rinse and clean out the recovery tank (Figure 63).
FIG. 63
3. Remove the recovery tank float shut- off screen
and clean (Figure 64).
FIG. 64
4. Remove the debris tray and empty (Figure 65)
FIG. 65
5. Drain the solution tank (Figure 66).
FIG. 66
6. Clean the solution tank filter (Figure 67).
FIG. 67
7. Rotate pad or replace when worn (Figure 68).
Disk Model
FIG. 68