MAINTENANCE
30
Tennant T5 (06- 16)
14. Clean the machine with an all purpose cleaner and
damp cloth (Figure 75).
FOR SAFETY: When servicing machine, do not
power spray or hose off machine.
FIG. 75
15. Inspect the condition of the scrub head skirt,
replace if worn or damaged (Figure 76).
Cylindrical Brush Model
FIG. 76
16. FaST Model: Connect the FaST- PAK supply hose
to the storage plug when not in use (Figure 77).
Remove any dried concentrate from the hose
connector by soaking it in warm water.
FIG. 77
17. Recharge the batteries (Figure 78). See
CHARGING BATTERIES.
FIG. 78
18. Check the battery electrolyte level weekly (See
BATTERY MAINTENANCE).
19. Clean wet/lead acid batteries to prevent corrosion
and check for loose battery cable connections (See
BATTERY MAINTENANCE).
MONTHLY MAINTENANCE
1. Periodically check the belt tension on the two brush
motors. Tighten the belt if you’re able to twist it
beyond 90_ at midpoint (Figure 79).
FOR SAFETY: Before leaving or servicing machine,
stop on level surface, turn off machine, remove key
and set parking brake if equipped.
Cylindrical Brush Model
FIG. 79
2. Inspect and clean the recovery tank cover seal
(Figure 80). Replace if damaged.
FIG. 80
To Next Page
Loading...
