TERA
TR-590
27
Wide / Narrow Band Set (Bndwdth
●
MENU 4)
Press “MENU” + number 4 in standby mode, screen displays:
Right after, press “Menu”, arrow points “WIDE” place, press to select NARROW 12.5K
or WIDE 25K, press “Menu” to confirm, press “EXIT” back to standby.
Repeater Offset or Shift Amount (Offset
●
MENU 5)
Repeater Shift or Offset amount means the difference between transmitting frequen-
cy and receiving frequency. Shift amount for this radio is 0~99.995MHz. Typical shift
amount are 0.600 on VHF and 5.000 MHz on UHF which are the default settings.
Press “MENU” + number 5 in standby mode, screen displays:
Then, press “ Menu”, arrow points “00.000” place, press to select frequency of Shift
Frequency, or input it by keyboard, press “Menu” to confirm, press “EXIT” back to
standby.
To Next Page
Loading...