Tera TR-590 - Transmit Timer and Busy Channel Lockout

TERA TR-590
37
Transmit Time Out Timer (TOT
●
MENU 24)
Purpose of TOT function is to stop the radio’s transmit after a pre-set amount of time.
Settable range of emission limit is 30~300 sec. Default TOT timer is set to 120 seconds.
Press “MENU”, then rotate the top selector knob to select
“Menu 24”, screen displays:
At that instant, press “MENU”, arrow points “OFF”, press to select OFF to turn off
TOT or TOT level you need, press “MENU” to confirm, press “EXIT” back to standby.
Busy Channel Lock Out (BCLO
●
MENU 25)
OFF: turn off the function; WAVE: carrier lock, prohibit transmitting when receives
signal; QT \ DQT: prohibit transmitting if anti-interference code is wrong, QT \ DQT
menu item is only displayed when anti-interference code function is available.
Press “MENU”, then rotate the top selector knob to select
“Menu 25”, screen displays:
Then, press “MENU”, arrow points “OFF”, press to select one of OFF / WAVE mode,
press “MENU” to confirm, press “EXIT” back to standby.