TERA
TR-590
43
VFO or Memory Channel Mode
Press “*” key to switch between VFO and MR mode, and Channel Name mode. MR+VFO
mode and Channel Name mode can be accessible, only if at least there is one channel
has been stored into a memory. In VFO mode, the frequency can be entered. Press “EXIT”
key to delete the previous figure. In MR mode, use the keyboard to input pre-set oper-
ation frequency. In Channel Name mode, if there is no such option as setting channel
name then the screen will display “CH-N”. N stands for the current channel.
To Next Page
Loading...