Tera TR-590 - Function Shortcuts Process

TERA TR-590
20
Function Shortuts Process
ID Name
Function
Shortcut
Screen Display Setting Select Optional Paramenter
Confrim
Setting
Return to
Standby
0 Scan Mode “MENU” + “0”
Press
or to start scan functions
“A/B EXIT”
1 Squelch Level
Setting
“MENU” + “1”
“MENU”
Press or
to select
Set Squelch Level 0-9;
Default Squelch Level = 5
“MENU” “A/B EXIT”
2 Transmit
Power
“MENU” + “2” “MENU”
Press or
to select
HIGH: high power;
MID: medium;
LOW: low power output
“MENU” “A/B EXIT”
3 Step
Frequency
“MENU” + “3” “MENU”
Press or
to select
Step Frequency: 2.5kHz, 5kHz,
6.25kHz, 10kHz, 12.5kHz,
25kHz, 50kHz, 100kHz
“MENU” “A/B EXIT”
4 Wide /
Narrow Band
“MENU” + “4” “MENU”
Press or
to select
WIDE: wide band (25kHz)
NARROW: narrow band
(12.5kHz)
“MENU” “A/B EXIT”
5 Repeater
Offset
Frequency
“MENU” + “5” “MENU”
Press or
to select
0~99.995 MHz optional.
00.600 MHz for VHF
05.000 MHz for UHF
“MENU” “A/B EXIT”
6 Repeater
Shift
Direction
“MENU” + “6” “MENU”
Press or
to select
+: plus frequency shift
-: minus frequency shift
OFF: No TX shift (simplex)
“MENU” “A/B EXIT”
7 Receive
CTCSS/DCS
Tone
“MENU” + “7” “MENU”
Press or
to select tone.
Press # to
choose between
CTCSS, DCS, OFF
50 sets of CTCSS tones
(67.0Hz~254.1Hz)
105 sets digital tones (D023N~
D754N) 105 sets reverse digital
tones (D023I~D754I)
“MENU” “A/B EXIT”