TERA
TR-590
42
Reset
Turn off the radio, press “EXIT“ key and then turn on the radio, upper line on the screen
shows ”RESET?”, lower line shows “VFO”. Press “MENU”, to make a choice by pressing
key or step control key. Press “MENU” again to confirm until the lower line on the
screen shows “ALL”, then the lower line will display “WAIT”, now it begins to clear all
settings and channel memories, default settings from factory. The radio will enter
factory MR mode automatically after all settings are cleared up.
Reverse Frequency Function
MR mode/ VFO mode, long press “*” key for two seconds a symbol “R” will appear on the
top of the screen, which means reverse function is on. Long press “*” again for another
two seconds, “R” will disappear. Tx and Rx frequency as well as CTCSS/CDCSS will
exchange when reverse frequency function is on.
Main Band Operation A/B Switch
MR mode/ VFO mode, press “EXIT” key will switch between top and bottom display.
A triangle symbol “ “ and “ “ will appear on top of the screen, which represents current
frequency.
To Next Page
Loading...