3
OPERATING PROCEDURES
Model TA50RT
Rev. 1 04/99
3 - 13
3.12.2. WIND CONDITIONS
The unit must not be operated in wind speeds which are in excess of 12.5m/sec (28 mph- 45 km/hr). During
normal machine operations, consideration should be given to nearby objects, especially when working in the
close vicinity of buildings and electrical cables. Sudden gusts of wind could cause the machine to sway and
trap the operator’s arms/hands between the cage railing and any obstruction. It is recommended that a
reasonable safe distance is kept between close obstructions and the cage assembly during all machine opera-
tions.
3.12.3. CRANE OPERATIONS
The TA50RT is fitted with four lifting points in the form of eyes at each corner of the chassis. During lifting
operations, take all instructions from the crane operator. Check identification plate.
3.12.4. TESTING THE TILT ALARM
IF THE TILT ALARM SOUNDS WHILST ELEVATED, RETRACT AND LOWER BOOMS AND
DRIVE TO A LEVEL LOCATION.
3.12. SPECIAL PRECAUTIONS
3.12.1. EMERGENCY TOWING
The machine can be towed by slinging chains around suitable support points. Do not exceed 5km/hr while
towing the machine, as wheels may not camber correctly. (See section 4.2.3). During towing, the brakes are
inoperative.
To Next Page
Loading...
