Model TA50RT
Rev. 1 04/99
4
EMERGENCY PROCEDURES
4 - 1
4.1. EMERGENCY PROCEDURES
It is not possible for us to foresee every emergency situation that could arise during operation of this machine.
Information on the following pages describes three typical emergency situations and lists appropriate actions
that can be taken.
When faced with an emergency, above all please remember: Stay Calm.
Think through the situation before operating the machine. Get help if necessary.
4.1.1 SITUATION: Platform elevated, operator not incapacitated, but unit will
not operate using the platform controls.
POSSIBLE CONDITION:
One or more functions not operating correctly.
Unit movement from un-selected control lever or switch.
Unit function will not stop unless power is switched off.
CORRECTIVE ACTION:
Remove foot from footswitch.
Evaluate the nature of the failure.
Switch to ground controls and operate.
If unable to return to the ground using the ground controls, contact an experienced operator to lower the
machine using the emergency pump and lowering procedure (see “Emergency Pump”, section 4.2.1).
Report the incident to your supervisor immediately.
To Next Page
Loading...
