Model TA50RT
Rev. 1 04/99
MAINTENANCE SCHEDULES
5
5 - 4
5.2. SERVICING CHECK LIST (BASIC MACHINE ONLY)
All checks must be completed by the operator before operating the unit.
5.2.1. DAILY
(a) Check hydraulic oil level.
(b) Check tyre condition.
(d) Check for hydraulic leaks.
(e) Check hoses for chaffing.
(f) Check that safety harness points are in tack.
(g) Check tilt alarm.
(h) Check that all switches are not damaged.
(i) Check cage controls for proper operation.
(j) Check wheel nuts for tightness.
(k) Check wheels for damage.
(l) Check axle securing bolts.
(m) Check diesel engine oil level.
(n) Check diesel engine fuel level.
To Next Page
Loading...
