TESA CLINOBEVEL 2 - Page 37

ENTER
ENTER
HOLD
37
Display shows new
correction value
Confirm correction value for
angle « + 45° »
Display shows
correction value
stored for position « 0 »
Insert
two cylindrical pins
and position
Clinovebel 2
to « 0° »
while it rests
on the surface plate
Ensure steady,
safe positioning
before executing
the measurement
and wait until
correction value is pro-
cessed
Confirm correction
value for position « 0 »
Display shows
correction value stored for
angle « - 45° »