HYDRAULIC PULLER TENSIONER PT2450
Manual: MI-PT2450-050-00-GB Date: 28.07.2018 Author: AT Page: 25 of 89
5. If the operator need to disconnect the remote control, rotate the switch to OFF position.
WARNING
When the radio remote control lost the signal, the machine will stop immediately
if the machine working like a PULLER.
When the machine work like a TENSIONER, the bull wheel will continue to move,
but there will be an audible alarm indicating that the machine is not connected.
To re-connect the remote control, follow the instructions in previous points.
On the radio control there is a lateral button: This button allows the operator to rotate the gantry holding
closed the negative brake circuit of the bull-wheel.
This command can be useful when loading or unloading the reel from the stands or during the rope
loading operations on the machine.
Button for the management of
the reel elevator, separately
from the bull-wheels circuit.
To Next Page
Loading...
