HYDRAULIC PULLER TENSIONER PT2450
Manual: MI-PT2450-050-00-GB Date: 28.07.2018 Author: AT Page: 2 of 89
5.1
CONNECTION MACHINE - HYDRAULIC HEAD OR REEL WINDER 57
5.2
ROPE OR CONDUCTOR MACHINE CHARGING 58
5.3
MACHINE USE – INDIPENDENT BULL-WHEEL 59
5.4
MACHINE USE – ELECTRONIC CONNECTION WITH INDIPENDENT BULL-WHEEL 61
5.5
MACHINE USE – MECHANICAL CONNECTION BULL-WHEEL 64
5.6
POINTS TO REMEMBER 66
5.7
END OPERATIONS 66
6.
AVAILABLE DEVICES 67
6.1
MACHINE ELECTRONIC CONNECTION (ALL.089) 67
6.1.1
MACHINES SET-UP 68
6.1.2
COMMAND “CONNECTED MACHINE” 73
6.1.3
ELECTRONIC SYNCRONIZE 77
6.1.4
TEMPORARY DISCONNECTION WITH ELECTRONIC CONNECTION 79
6.1.5
CONDITIONS OF ALARM WITH CONNECTED MACHINES 80
7.
SAFETY CONDITIONS 81
7.1
SAFETY DEVICES 81
7.3
PERIODIC OPERATIONS 83
7.4
RESIDUAL RISKS 83
8.
MAINTENANCE 84
8.1
GENERAL PRESCRIPTIONS 84
8.2
LEVELS CONTROL 84
8.3
TYRES INFLATION PRESSURE 84
8.4
SUGGESTED LUBRICANTS 84
8.5
ENDOTHERMIC ENGINE MAINTENANCE 85
8.6
HYDRAULIC CIRCUIT MAINTENANCE 85
8.7
REDUCTION GEAR – STATIONARY BRAKES MAINTENANCE 85
8.8
RADIATORS’ MAINTENANCE 86
8.9
GREASING 86
8.10
OTHER PERIODIC OPERATIONS 86
8.11
SUMMARY TABLE FOR ORDINARY MAINTENANCE 87
9.
HOW TO DISABLE THE MACHINE 88
9.1
TRANSPORT 88
9.2
EXTENDED SERVICE STOP 88
9.3
DISMANTLING 88
10.
ENCLOSED DOCUMENTS 89
10.1
TABLES 89
10.2
SYTEMS 89
10.3
OTHER DOCUMENTS 89
To Next Page
Loading...
