HYDRAULIC PULLER TENSIONER PT2450
Manual: MI-PT2450-050-00-GB Date: 28.07.2018 Author: AT Page: 79 of 89
6.1.4 TEMPORARY DISCONNECTION WITH ELECTRONIC CONNECTION
When the machines are electronically connected, the operator can temporarily disconnect one or more
machines from the other.
This feature is only available when all connected machines are stop and not working (the MASTER
machine joystick in the center).
This function is activated by the button located on the side of each radio control: Holding this button, the
operator can disconnect the single radio control, temporarily resuming all the controls on the single
machine.
WARNING
Press and hold the button to activate the temporary machine disconnection function.
As soon as the button is released, the single machine will reconnect to the other.
WARNING
Fino a quando sarà premuto il tasto di disconnessione sulla singola macchina, non sarà
possibile riprendere le normali operazioni di tesatura.
Until the button is hold engage on the single machine, it will be impossible to re-start
normaly stringing operation on the other machines.
To Next Page
Loading...
