HYDRAULIC PULLER TENSIONER PT2450
Manual: MI-PT2450-050-00-GB Date: 28.07.2018 Author: AT Page: 50 of 89
This will make it possible:
1- Control of the recovery/release single circuits (bull-wheels virtual joystick);
2- Release circuit with bull-wheels circuit 1 (bull-wheels virtual joystick);
3- Recover circuit with bull-wheels circuit 1 (bull-wheels virtual joystick);
4- Release circuit with bull-wheels circuit 2 (bull-wheels virtual joystick);
5- Recover circuit with bull-wheels circuit 2 (bull-wheels virtual joystick);
6- Display the Virtual bull-wheels joystick position;
Depending on the machine configuration of the selected machine (see "Machine Configuration Screen
Machine", cap.5.5.2.3), the above screens will be modified and only the running commands will be
displayed.
1
2
3
4
5
6
To Next Page
Loading...
