TESTO 300 LL NEXT LEVEL - Protocols

8 Using the product
36

Measuring site parameters menu is opened.
3
Enter data.
The Name of measuring site
input field is a required field and must be
filled in.
4
Confirm each input with .
An additional button (>) appears in some input fields.
These buttons contain a selection of parameters which are adopted in
the input field by tapping on them.
5
Save.
Edit customer
1
Tap customer.

Customer input screen is opened.
2
Input fields can be edited.
Edit measuring site

Customer input screen is open.
1
Tap Measuring site button.
2
Select Measuring site.
3
Edit data.
4
Save.
8.2.2 Protocols
1
Call up function: | Protocols

Protocols menu is displayed.
2
Select customer.
3
Open measuring site.