TESTO 300 LL NEXT LEVEL - Overview of options

9 Performing the measurement
79
Flawless operation of the instrument, the fine pressure probe and the capillary
hoses must be determined by regular checks once every six months at a
technical test centre of the Guild of Master Chimney Sweeps.
9.6 Overview of options ( )
Options
Description
Edit measurem. view
Add (add), delete ( ) measurement
parameters,
change display sequences ( ) and units (click
on (Unit).
Zeroing Gas Sensors
Manually zeroing gas sensors.
Menu is only available for measurements
with gas sensors.
Zeroing Smart Probes
Zero the differential pressure Smart Probe.
The menu is only available for
measurements with the Smart Probe testo
510i.
Averaging | On
Calculation of a mean value within a preset
time.